| Size: | |
|---|---|
| Length: | |
| Quantity: | |
Brief Description
The blunt-tip micro cannula needle is a small cannula of needle which is designed for atraumatic intradermal injections. Depending on the size of the inner diameter it can be used either for fat transfer, or for the injections. For fillers, such as hyaluronic acid filler, collagen, polylactic acid.
Additional Information
| Size | Gauge: 14G, 15G, 16G, 18G, 19G, 20G, 21G, 22G, 23G, 24G, 25G, 26G, 27G, 28G, 29G, 30G Length: 25mm, 38mm, 50mm, 70mm |
| Quantity | Box of 50, Carton of 50 boxes |
| Dimension (carton) | 49.5x30.5x46cm |
| Weight (box) | 0.4kg |
| Filled area | Entire Lip, Nasolabial Fold, Mandibular Sulcus, ect. |
| Certification | ISO13458/ CE/ GB15811 |
| MOQ | 2500 pcs for neutral packing, 50,000 pcs for OEM packing |
| Shelf Life | 5 years |
Mandatory Information
Micro Cannula Needle, a Class IIa medical device manufactured by Horizon Medical. For use by healthcare professionals only. The choose of specific length and gauge of the micro cannula needle is determined by the practitioner according to the area to be treated. Please read instructions carefully before use.
Product Description
| NO | YES |
| No intravascular injection | Virtually no bruising |
| Removing the risk of: | Lessen pain considerably |
| Necrosis | Minimal residence time |
| Blindness | Single point of entry for wider coverage |
| Ophthalmoplegia | Stimulates new collagen production |
| Waste fillers | Less product filling is needed to treat most areas |
 | Recovery: The social downtime associated with traditional technique is practically eliminated with less edema and swelling and minor bruising and/or vessel laceration. Without ecchymosis, can easily return to normal work and social life immediately.
Flexibility: Micro cannula needle allows access to virtually any area of the facial anatomy for improvement with fillers. Previously hard to treat areas such as the delicate area under the eyes, hollow cheeks and vertical cheek wrinkles are easily corrected using this techniques. Fillers are more evenly distributed in the injection area to achieve better injection effect.
Comfort: Patients by micro cannula injection experience much less discomfort than by needle injections. The entire lip, nasolabial folds, mandibular sulcus, cheek, or temple area can be augmented through a single puncture point. Only 2-4 entry points are needed for full face injections. Speed: Procedure with micro cannula is less time-consuming, because of the techniques used and decreased need for anesthesia (numbing cream or injections).
Value: Fillers can be distributed with greater precision, so the results are more natural, while less product filling is needed to treat most areas.
New collagen: Research surgical care suggests that moving the micro cannula back-and-forth in the dermis, can stimulate the fibroblasts to produce new collagen, even without the injection of fillers. The skin will begin to tighten by initiating growth factors. |
①The 22G x 50mm blunt micro cannula can be used for viscous and high concentration filler, to be injected deeply into the skin to fill the volume.
②The 23G x 38mm blunt micro cannula can be used for the filling of medium concentration and viscosity , HA's (of shorter length for precise injection).
③The 25G x 50mm blunt micro cannula can be used for medium & thick HA and non HA fillers, for injection of medium & thick (can be used for most facial fillers and injection, additional length to cover more treating area).
④The 25G x 38mm blunt micro cannula can be used for medium & thick HA and non HA fillers, for injection of medium & thick (can be used for most facial fillers and of shorter length for more precise injection).
⑤The 27G x 50mm blunt micro cannula can be used for medium concentration and viscosity filler, HA's (additional length to cover more treating area).
⑥The 27G x 38mm blunt micro cannula can be used for medium concentration and viscosity filler, HA's (the most general size used for most facial injections).
⑦The 27G x 25mm blunt micro cannula can be used for medium concentration and viscosity filler, HA's (of short length for precise injection).
⑧The 30G x 25mm blunt micro cannula is used for the filling of low concentration and viscosity HA filler, superficial fillers (tearing grooves and fine lines of eyes, etc more precised area).
Remarks: (✱)
⑨The 18G x 70mm blunt micro cannula is used for re-injecting fat to reduce the risk of cross-contamination, or reduce the risk of discomfort causing by unavoidable fat residues after disinfection/autoclaving.
In addition, reusable sleeves do not slip after several uses.
 | OUR MICRO CANNULA NEEDLE FOR PIERCING IS FIT ALL TYPES OF STANDARD SYRINGES, BUT WE RECOMMEND USING A LUER-LOCK SYRINGE. |
The gauge of the sharp needle should be slightly superior to the gauge of the micro cannula blunt needle in use.
★ The 30G & 27G micro cannula needles come packed with 25G sharp needle;
★ The 25G micro cannula needle comes packed with 23G sharp needle;
★ The 23G micro cannula needle comes packed with 22G sharp needle.
(Can refer to the "Hypodermic needle cannula gauge chart" for all details.)
Tip: Use the length of the micro cannula as a point of reference to where to make the hole.
Answer: The MOQ for production is 2,500 pcs each size if accept neutral packaging. The MOQ for OEM packing is 50,000 pcs.
Answer: We produce according to client's order.
Answer: Yes, we can provide few free samples for your testing.
Answer: Yes, we have CE, ISO certificates.
Answer: Yes, OEM brand is ok.
Answer: Yes, we are one of the best wholesale micro cannula piercing needle suppliers from China. We supply disposable cannula tipped needle with various sizes, of which the most commonly used length is 38mm, 50mm and 70mm, from 14G, 16G, 18G, 20G, 21G, 22G, 23G, 25G, 27G and 30G. We are one of the China cannula needle manufacturer who can accept OEM branding. We supplying the products based on international ISO standards, also equipped with professional QC team to assure the good quality.
We can also help to build factory & production line if you are interested to build your own micro cannula needle factory and start your own manufacturing. As an OEM blunt cannula point needle manufacturer, we have a great understanding of market trends, also have systematic product knowledge training system.
Answer: A cannula needle is a thin stainless tube like a needle, but with longer length, and comparing with the sharp edge of needle to pierce the skin, it has a blunt tip. A cannula cannot be used separately to puncture the skin, a needle is required first to make a puncture hole in the skin, then the cannula can be inserted through.
Answer: A cannula needle is used for dermal filler, and the entire lip, nasolabial folds, mandibular sulcus, cheek, or temple area can be augmented through a single puncture point. Only 2-4 entry points are needed for full face injections. The social downtime associated with traditional technique is practically eliminated with less edema and swelling and minor bruising and/or vessel laceration. Without ecchymosis, can easily return to normal work and social life immediately.
But a sharp needle need to be used to puncture a hole in the skin before the cannula can be inserted through.
